FOR EXPERIMENTS ON SLIDING FRICTION , COMPRISES INCLINED WOOD PLANE 600 X 100 X 20 MM ,WITH 22 MM DIAMETER PULLEY , HINGED TO WOOD BASE 450 X 100 X 20 MM WITH ONE EACH WOOD BLOCKS ,200 X 75 MM AND 100 X 75 MM,STEEL BLOCK 100 X 75 MM. SCALE PAN 75 MM DIAMETER ,CORD AND HOOKS .

Prod ID : FA-4201

TO DEMONSTRATE THAT A BODY IMPELLED HORIZONTALLY WILL HAVE VERTICAL ACCELERATION SAME AS THAT OF A BODY FALLING FREELY. TWO 19MM DIA STEEL BALLS ARE LAUNCHED BY RELEASING A PUSH BUTTON .THIS PROJECTS ONE BALL FORWARD AND THE OTHER FALLS FREELY.THIS MECHANISM IS MOUNTED ON A WOODEN BLOCK ( 180 X 60 X 30 MM ).

Prod ID : FBA-4202

THIS APPARATUS CONSISTS OF A SOLENOID ( FOR PROMPT RELEASE OF THE SPHERE ON BEING DISCONNECTED ) AND GATE SWITCH UNIT MOUNTED ON A BASE WHICH IS CLAMPED ON A 12 MM DIAMETER RETORT STAND ROD.CONNECTIONS ARE MADE THROUGH 4 MM SOCKETS ,THE GATE SWITCH UNIT CONSISTS OF A HINGED METAL PLATE HELD AGAINST AN ADJUSTABLE CONTACT BY MEANS OF SMALL PERMANENT MAGNET SO THAT BY PROPER ADJUSTMENT THE PLATE FALLS PROMPTLY AT THE IMPACT OF THE FALLING SPHERE.CENTI SECOND TIMER CAN BE USED WITH THIS APPARATUS.

Prod ID : GFFA-4203

MAINS OPERATED ELECTRONIC TIMER READS 0 TO 99.99 SECONDS.THE DISPLAY COMPRISES OF FOUR 7 SEGMENT DIGITS TO READ SECONDS AND CENTI SECONDS.TWO PAIRS OF 4 MM SOCKETS COLOUR YELLOW (START ) BLACK (STOP ) WITH TWO PUSH BUTTON SWITCHES ARE CONTROLLED WITH A MODE SWITCH WHICH ENABLE EITHER MAKE OR BREAK PULSES TO BE USED TO OPERATE THE TIMER.
POWER SUPPLY : 2V / 0.5 A WITH RESET .

Prod ID : CST-4204

MAINS OPERATED ELECTRONIC TIMER READS 0 TO 99.99 SECONDS. THE DISPLAY COMPRISES OF FOUR 7 SEGMENT DIGITS TO READ SECONDS AND CENTISECONDS. TWO PAIRS OF COLOUR CODED 4 MM SOCKETS WITH PUSH BUTTONS ARE CONTROLLD WITH A MODE SWITCH WHICH ENABLES EITHER MAKE OR BREAK PULSE TO BE USED TO OPERATE THE TIMER. WITH RE-SET ACTION.

Prod ID : PMCT-42041

HARD GLASS TUBE 610 X 48 MM ,WITH TWO RUBER BUNGS ,ONE CARRING BRASS TUBE AND 380 MM RUBBER TUBING FOR EVACUATION BY A VACUUM PUMP .

Prod ID : FFT-4205

COMPRISING ,SPHERE WITH SMALL HOOK FOR SUSPENSION
AVAILABLE IN SIZE : 13 , 19 & 25 MM DIAMETER .

Prod ID : PLB-4206

LIGHT ALLOY WITH CORDS AND HOOK.
SCALE DIAMETER : 75 MM WITH CORDS AND HOOKS
........................: 100 MM WITH CHAINS AND RINGS .

Prod ID : SP-4207

USED FOR PERFORMING EXPERIMENTS ON VELOCITY , ACCELERATION ETC, THE TRACK 1720 X 150 MM ,IS FITTED WITH LEVELLING FEET, FOAM COVERED STOPS AT BOTH ENDS.AND ALUMINIUM PULLEY 50 MM DIAMETER.,AN ARRANGEMENT TO RELEASE TROLLEY AND SPRING STEEL VIBRATOR WITH MARK AT 5HZ AND 8 HZ IS PROVIDED ,WITH ACCURATELY BALANCED WHEELS RUNNING IN SELF CONTAINED SUPPORT BRACKETS 5 CALIBRATED WEIGHTS , 2 BRUSHES , 200 PAPER STRIPS , INK , 50 METERS OF CORD AND 3 WOODEN BLOCKS .

Prod ID : FT-4208

COMPRISES OF A STEEL BAR , 1 METER LONG DRILLED AT 50 MM INTERVALS , REMOVABLE KNIFE EDGES AND A SUPPORT BRACKET FOR MOUNTING ON WALLS.

Prod ID : CPR-4209

COMPRISES OF A BRASS ROD 120 CM LONG 10 MM DIA, ONE PAIR EACH OF SMALL AND LARGE ADJUSTABLE BRASS AND WOODEN MASSES , TWO STEEL KNIFE EDGES SET IN ADJUSTABLE METAL HOLDER AND A METAL SUPPORT BRACKET FOR MOUNTING ON WALLS.

Prod ID : CPKR-4210

TO DEMONSTRATE , TRIANGLE , PARALLELOGRAM AND POLYGON LAWS OF FORCES.THE DISC IS MADE OF ALUMINIUM 40 CM DIA GRADUATED IN DEGREES PROVIDED WITH 4 PULLEYS HAVING INDEX MARK.HEAVY CAST IRON BASE WITH LEVELLING SCREWS IS PROVIDED .SUPPLIED COMPLETE WITH 4 SETS OF SLOTTED WEIGHTS 500 GM .

Prod ID : UFT-4211

WHEN THE GOVERNOR IS ROTATED FASTER AND FASTER , THE BALLS ARE THROWN OUT BY CENTRIFUGAL FORCE IN AN EVER WIDENING CIRCLE.THE JOINTED ARMS ABOVE AND BELOW BEING BROUGHT CLOSER AND CLOSER TOGETHER AS IN WATTS STEAM ENGINE.THIS ILLUSTRATES THE FLATTENING OF PLANETS AT THE EQUATOR OWING TO THEIR ROTATION. WATT GOVERNOR IS ROTATED WITH HELP OF A WHIRLING TABLE.

Prod ID : WG-4212

IT CAN BE USED IN VERTICAL OR HORIZONTAL POSITION . IT IS FITTED WITH HAND WHEEL , BELT DRIVEN PULLEY AND ADAPTER FOR MOUNTING NEWTON'S COLOUR DISC , WATT'S GOVERNOR , SAVART'S TOOTHED WHEEL , SEEBECK'S PARATUSES WHICH NEED TO BE ROTATED.

Prod ID : WT-4213

TO DEMONSTRATE THE PRINCIPLE OF CONVERSION OF MOMENTUM AND SHOW THAT MOMENTUM HAS DIRECTION AS WELL AS MAGNITUDE. CONSISTS OF A CURVED WOODEN RUNWAY 280 X 76 MM LENGTH X HEIGHT WITH AN 8 MM GROOVE,AN INDEX MARK NEAR TOP AND A SLOTTED METAL PLATE AT BOTTOM. A DEVICE CAN BE ATTACHED TO THE PLATE TO PROVIDE SUPPORT TO THE OBJECT SPHERE EITHER EXACTLY OPPOSITE THE RUNWAY OR AT SIGHTLY OBLIQUE POSITION. A PLUMB BOB AND 2 STEEL BALLS ARE PROVIDED. THE APPARATUS CAN BE FIXED TO THE TABLE WITH A G- CLAMP ( WHICH IS NOT PROVIDED )

Prod ID : PMCTD-42042

FOR DETERMINING SPECIFIC GRAVITY BY ARCHIMEDES PRINCIPLE. WITH ONE PAIR OF LONG FRAMES AND ONE SHORT FRAME WITH A HOOK INDERNEATH FOR SPECIFIC GRAVITY EXPERIMENTS. WITH THREE PANS ,ADJUSTABLESTAND AND SCALE. MOUNTED ON A WOODEN BASE.

Prod ID : PMHB-42043

FOR INVESTIGATING THE NATURE OF MASS AND THE DISTINCTION BETWEEN MASS AND WEIGHT. TWO METAL
TRAYS 130 X 55 X 23 MM ARE JOINED TOGETHER WITH TWO SPRING STEEL STRIPS OF 10 MM WIDTH , THE DISTANCE BETWEEN THE TRAYS BEING 215 MM . ONE TRAY IS DRILLED TO ACCEPT 3 EQUAL CYLINDRICAL MASSES. THE OTHER TRAY CAN BE CLAMPED TO A BENCH HORIZONTALLY OR VERTICALLY. COMPLETE WITH 3 MASSES AND A G-CLAMP.

Prod ID : PMIB-42044