Measuring is a rare combination of six instruments in
one. It is a Measuring Microscope for rectangular coordinate
measurements to 0.01 mm and angular measurements to
5 minutes of an Arc. An Optical Depthscope for measuring
depth to 0.005 mm without physical contact with the
specimen. A Tool Maker's Microscope for detecting and
measuring errors in cutting tools and optical gauging
of screw threads; A Metallurgical Microscope for examining,
microstructures at powers up to 1200x and measuring
to tolerance of 5 microns; An Optical Projector for
screen examination, group viewing and inspection of
parts by optical comparison and A Photo Microscope for
making permanent photograph of quality control tests
for future reference. Complete with all necessary accessories
& attachment in wooden cabinet.
Device : Large support for inspection of components
to be held between centres. Swivel angle 20* both sides
for helix adjustment .
: Set of two with clamps size 50 mm.
Thimbles : With 0.001mm least count.
Jaws, with lever opening, rotatable jaws, clickstop
at 90* positions
Holder : With Pinch type mechanism, adjustable centres
with max opening 20 mm.
chuck: With rotatable Holder, 4 collets to accommodate
diameters of .5mm to 2.5mm.
Attachment :With a ground glass screen of 1 00 mm
with condenser lens complete with tube and eyepieces.
Objectives : 5X
eyepieces 10x with Helex movement of eye lens. Available
following graticules complete.
Measuring Eye piece with Metric Thread 0.25 to 1.0mm.
piece with Metric Thread 1.25 to 2.0 mm.
piece with Whit-worth 60 to 26 TPI.
piece with whit-worth 24 to 18 TPI.
piece with Concentric circle 0.05mrn to 4mm.
piece with Reticle 55° Angle.
piece with Reticle 60° Angle.
With Printer to be fixed with the Microscope.